Fully Automatic Transformer SFRA sweep frequency response analyzer
- The working principle of GDRZ-902 is to detect whether the transformer is deformed according to the frequency response curve drawn by the test, and provide advice for the maintenance of the test instrument.
- SFRA usually has three measurement methods: time method (comparing the current SFRA result with previous results of the same device), type method (SFRA of a transformer compared with the same type of transformer), and phase-to-phase comparison (one-phase SFRA result) Compare with results from other phases of the same transformer).
- SFRA is mainly used for transformer inspection after short-circuit test, integrity verification of transformer after transportation, condition assessment after high-value transient fault current occurs, routine diagnostic measurement, diagnosis after transformer alarm or protection trip, and monitoring value occurrence Testing after major changes, and further inspection and scientific research after abnormal results of routine tests.
- Our company has designed the winding deformation tester based on the idea and the advanced technique. It could draw the frequency response curve accurately. Then we compare the curves horizontally or vertically to detect the deformation of the transformer.
|GDRZ-902 Functional SFRA Analyzer And Transformer Winding Deformation Tester
|Two different sweep modes: Linear sweep, Section sweep
|0.5KHz - 1MHz interval 0.5KHz 2000 dots
|50Hz - 100Hz interval 2Hz 25 dots
|100HZ -1KHz interval 20Hz 45 dots
|1KHz - 10KHz interval 50Hz 180 dots
|10KHz - 100KHz interval 0.2KHz 450 dots
|100KHz - 500KHz interval 0.5KHz 800 dots
|500KHz - 1000KHz interval 1KHz 500 dots
|(-100dB) - (+20dB)
|Signal Input Impedance
|Signal Output Impedance
CHONGQING GOLD MECHANICAL & ELECTRICAL EQUIPMENT CO., LTD
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd. mainly design and manufacture the oil purifier and electrical testing equipment for more than 10 years.
After several years' development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of oil purifier and electrical testing equipment in China;
We have developed sales channels in many countries such as UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan, India, Germany, Belgium, USA, Mexico, Kenya, Nigeria, South Africa and other countries worldwide.
And we have gained strong advantage and high reputation in international market.
We have persisted on the business idea of "Integrity Basis and Quality First" for the stable and constant development. We are making effort to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, quality and service are our supreme target!
♣Inquiry will be replied within 24 hours.
♣Welcome to visit our factory.
♣Technical datas and operation manual sent for evaluation.
♣Training how to install the machine, training how to use the machine at our factory.
♣Engineers available to service machinery overseas at customers' cost.
- What's the delivery lead time?
"For most of the products, delivery lead time is 10 days after the order is confirmed; For some customized products, please check with the sales person."
- What's the payment term?
"For total amount below USD3,000.0, payment term is 100% T/T as deposit; For total amount above USD3,000.0, payment term is 30% T/T as deposit, the balance before delivery; The payment term is also negotiable."
- What's the warranty period?
"Warranty period is 1 year"